RC-2201S3.S20 10/100/1000Mbps to 1000Base-LX Single Mode, Single Fibre SC Managed WDM Converter

Gigabit Ethernet 10/100/1000Base-T to 1000Base-LX Single Mode/Single Fibre WDM Fibre Optic Managed Media Converter. The RC-2201xx series of Managed Media Converters is designed to convert from 10/100/1000Base-TX to 1000Base-SX/LX Gigabit Ethernet. The RC-2201xx family support a wide range of model options including MultiMode, Singlemode and WDM (Wave Division Multiplexing). WDM enables network connectivity over a single core of SingleMode fibre, rather than the usual separate send and receive paired cores. The Converters support various remote monitoring and maintenance features including: Web based (HTTP) management, Telnet management for CLI applications and Local RS-232 Console connectivity. An integrated SNMP Agent can also provide mission critical alert information via SNMP Traps, any standard SMTP email server, or via SMS notification services. Trap events can be customised to suit your particular applications needs. The RC-2201xx series supports cable ranges up to 50 kilometres. All models share a rich feature set, including case intrusion, power voltage and temperature detection, external loop-back capability, broadcast storm filtering, detection of single fibre disconnection, user login management, TFTP on-line upgrade, and many other features. Note: WDM models must be used as a pair, ie. RC-2201SCS5.S20 must be used with RC-2201SCS3.S20 (or equivalent WDM device)

Click to Enlarge Image

Product Features

Product Specification

Ports ~ One 10/100/1000Mbps RJ-45 UTP port ~ One 1000Mbps fibre port in Multimode or Singlemode Console Port ~ DB9 Console Port Dimensions ~ 141W x 96D x 44H mm Input Power ~ 5V +/- 5%, 3A from external power adapter ~ 2.45A actual operating current drain Power Consumption ~ 12.6 Watts Maximum Flash ~ 4M bytes CPU Main Memory ~ 16M bytes MAC Address and Self-learning ~ 8K Packet Buffer Memory ~ Up to 48K Flow Control ~ Backpressure for half duplex, IEEE802.3x for full duplex LED Display ~ TP Port : Link 1000, Activity, FDX / COL ~ Fibre Port : Link/Activity ~ Device : Power, CPU/Loop Management ~ In-Band : Web-Based, SNMP, Telnet; ~ Out-Band : RS -232 Console SNMP Management Agent ~ MIB II(RFC 1213), Private MIB Software Upgrade ~ TFTP Environmental Temperature ~ Operating: 0 ~ 50°C ~ Storage: -20 ~ 70°C Humidity ~ 5% ~ 95% Standards ~ IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3z Twisted-Pair Port Interface ~ Connector:Shielded/Unshielded RJ-45, 8-pin jack ~ Impedance: 100 Ohms nominal ~ Signal Level Output (differential): 0.95 to 1.05V (100base-TX) ~ Signal Level Input: 350mV minimum (100Base-TX) ~ Supported Link Length: 100m ~ Cable Type: (10Mbps segments): Category 3, 4 or 5 UTP (100m); (100Mbps segments): Category 5 UTP (100m); (1000Mbps segments): Category 5 UTP (100m) Multi Mode Fibre Optic Port Interface ~ Connector: ST, SC ~ Wavelength: 850nm ~ RX Input Sensitivity: -31 dBm maximum ~ Output Power: -14 dBm to -23.5 dBm (50/125um); -14 dBm to -20 dBm (62.5/125um) ~ Supported Link Length: up to 220m full duplex ~ Cable Type: 50/125, 62.5/125, F/O Single Mode Fibre Optic Port Interface ~ Connector: SC ~ Wavelength: 1310nm RC-2201SC.S10; 1550nm RC-2201SC.S30; 1550nm RC-2201SC.S50; 1310/1550nm Single fibre SC (WDM S3/S5) ~ RX Input Sensitivity: -31 dBm maximum ~ Output Power: -8 dBm to -15 dBm (9/125um) ~ Supported Link Length: up to 50km full duplex ~ Cable Type: 9/125 F/O recommended

Ordering Information