|
Discontinued Product.Profibus to Modbus GatewayThe Panda PUP-552 is a Profibus to Modbus Gateway, designed for slave devices utilising the Profibus DP protocol.
The PUP-522 allows the Profibus Master to access Modbus devices, these may include PLC's or sensor equipment. Profibus is used at the field level and provides benefits for almost any application in Factory Automation, Process Automation, Drives & Motor Control and Functional Safety. Devices such as remote I/O, drives, motor starters, weighing and dosing systems, human machine interfaces, energy systems can all be connetced via a profibus network.
| 
Click to Enlarge Image
|
Product Features| | - Supports DP-V0 slave protocol and hierarchy
- Automatic detection of transmission rates from 9.6 to 12,000Kbps
- Supports multiple baud rates for COM1 from 1.2 to 115.2Kbps
- Supports a maximum input data length of 128 bytes and output data length of 130 bytes
- Supports Modbus Master and Slave mode
- Supports Modbus RTU and ASCII format
- Address 0~126 can be set via DIP switch or EEPROM
- Equipped with network isolation protection, 3000VDC isolation protection on PROFIBUS ad 4KV ESD protetcion
- Din Rail mountable
|
|
Product Specification| |
Profibus Interface
~ 9-pin D-Sub Female
Profibus Controller
~ Siemens SPC3
Profibus Transceiver
~ ADI ADM2486 iCoupler Isolated Transceiver
Power Input
~ 10~30VDC
Power Protection
~ 3000VDC isolation & 4KV ESD Protection
Power Consumption
~ 2.5 watts
Dimension
~ IP-20 standard, 72mm (W) x 118mm (H) x 33mm (D)
Installation
~ DIN-Rail, Panel mount
Temperature
~ Operating : -10 to 60 degrees C
~ Storage: -40 to 80 degrees C
Humidity
~ 5 to 90% RH, Non Condensing
|
|
Ordering Information
|