|
MDR2005 Din Rail Mounted Power SuppliesThe Din Rail mounted power supply can be used to power a single or multiple Industrial Switches.
Because of it's Din Rail based mounting kit the power supply can be mounted along side your Industrial Ethernet Equipment.
| 
Click to Enlarge Image
|
Product Features| | - Universal AC input/Full range
- Protections:Short circuit/Over load/Over voltage
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Built in DC OK active signal
- LED indicator for power on
- 100% full load burn-in test
- No load power consumption<0.75W
|
|
Product Specification| |
OUTPUT
~ DC VOLTAGE: 5V
~ RATED CURRENT: 3A
~ CURRENT RANGE: 0 ~ 3A
~ RATED POWER: 15W
~ RIPPLE & NOISE (max.): 80mVp-p
~ VOLTAGE ADJ. RANGE: 4.75 ~ 5.5V
~ VOLTAGE TOLERANCE: +/- 2.0%
~ LINE REGULATION: +/- 1.0%
~ LOAD REGULATION: +/- 1.0%
~ SETUP, RISE TIME: 500ms, 30ms/230VAC, 1000ms, 30ms/115VAC at full load
~ HOLD TIME (Typ.): 50ms/230VAC, 20ms/115VAC at full load
INPUT
~ VOLTAGE RANGE: 85 ~ 264VAC, 120 ~ 370VDC
~ FREQUENCY RANGE: 47 ~ 63Hz
~ EFFICIENCY (Typ.): 76%
~ AC CURRENT (Typ.): 0.55A/115VAC, 0.35A/230VAC
~ INRUSH CURRENT (Typ.): COLD START 20A/115VAC, 40A/230VAC
~ LEAKAGE CURRENT: <1mA / 240VAC
PROTECTION
~ OVER LOAD:
105 ~ 160% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
~ OVER VOLTAGE:
5.75 ~ 6.75V
Protection type : Shut down o/p voltage, re-power on to recover
FUNCTION
~ DC OK ACTIVE SIGNAL (max.): 3.75 ~ 6V / 50mA
ENVIRONMENT
~ WORKING TEMP.: -20 ~ +70 degrees C (Refer to output load derating curve)
~ WORKING HUMIDITY: 20 ~ 90% RH non-condensing
~ STORAGE TEMP., HUMIDITY: -40 ~ +85 degrees C, 10 ~ 95% RH
~ TEMP. COEFFICIENT: +/- 0.03%/degrees C (0 ~ 50 degrees C)
~ VIBRATION: Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY & EMC
~ SAFETY STANDARDS: UL508, TUV EN60950-1 Approved
~ WITHSTAND VOLTAGE: I/P-O/P:3KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC
~ ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
~ EMI CONDUCTION & RADIATION: Compliance to EN55011,EN55022 (CISPR22) Class B
~ HARMONIC CURRENT: Compliance to EN61000-3-2,-3
~ EMS IMMUNITY: Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024,EN61000-6-1,EN61204-3 Light industry level, criteria A
OTHERS
~ MTBF: 236.9K hrs min. MIL-HDBK-217F (25 degrees C)
~ DIMENSION: 22.5 x 90 x 100mm (W*H*D)
~ PACKING: 0.19Kg; 72pcs/14.7Kg/0.91CUFT
|
|
Ordering Information
| | | MDR2005 | DIN Rail 90-264 VAC (120-370 VDC) input, 5 VDC @ 3 amps output | Where to Buy |
|
|