|
HME-423E - 4x 10/100Base-TX ports, and Dual 100Base-FX port (SC, Single Mode, 30km), -40°C to 85°CThe HME-423E SNMP managed, industrially hardened Ethernet Switch offers six 10/100Base-TX and two 100Base-FX Single Mode fibre optic uplink ports.
Husky HME-421E and 423E series managed Industrial Fast Ethernet Switches are highly reliable and fault-tolerant devices, with powerful SNMP features required by Industrial Ethernet applications. HME-421E and HME-423E series models can be remotely configured via web browser and managed by SNMP and RMON. Advanced security features such as VLAN and IP security are provided, while performance is optimised by features like QoS (Quality of Service) and IGMP snooping and querying.
All HME-421E/423E models support the Husky Ring Redundancy, which allows the switch to reconfigure and provide a redundant path in the network. In case any part of your network is disrupted or disconnected, the redundancy feature allows a fault recovery time of less than 10ms to save your network from encountering an interruption or failure.
All switches in the series are designed for demanding industrial environments; all models are housed in a metal IP-31 rated enclosure. These switches provide high levels of immunity to electromagnetic interference and power supply surges typically found in industrial plant environments. HME-421E and 423E models are specified for an extended operation temperature of -40° to 80°C.
| 
Click to Enlarge Image
|
 Quick Download : HME-421E Data Sheet
Quick Download : HME-423E Data Sheet
Product Features| | - Provides 4x 10/100 Mbps Ethernet ports with RJ-45 connectors
- Provides 2x 100 Mbps multimode/single mode SC type fibre ports
- Redundant X-Ring recovery time < 10 ms on full load
- Configurable by WEB browser
- Robust Aluminum case complying to IP-30 housing standard
- DIN-Rail, Panel mount or desktop installation
- Supports 12 to 48VDC redundant power with polarity reverse protection
|
|
Product Specification| |
RJ-45 Ports
~ 4x 10/100Base-TX auto-negotiation speed, Full/Half duplex, auto MDI/MDI-X
Fibre Ports
~ 2x 100Base-FX Multimode port (SC connector) (HME-421E)
~ 2x 100Base-FX Single mode port (SC connector) (HME-423E)
Alarm
~ Relay output for port break and power failure, current carry ability (1A at DC 24V)
Power Input
~ 12 to 48VDC
~ Redundant power with removable terminal block
Power Protection
~ Power Reverse Polarity
Power Consumption
~ 11 watts
Dimensions
~ IP-30 standard, 54 mm (W) x 152 mm (H) x 105 mm (D)
Operating Temp
~ -40 to 80 C
Storage Temp
~ -40 to 85 C
Operating Humidity
~ 5% to 90% RH (non-condensing)
|
|
Ordering Information
| | | HME-423E | 4x 10/100Base-TX ports, and Dual 100Base-FX port (SC, Single Mode, 30km), -40°C to 85°C | Where to Buy |
| HME-421E | 4x 10/100Base-TX Ports and Dual 100Base-FX port (SC, Multimode, 2km), -40°C to 85°C | Where to Buy |
|
|