|
DR4505 DIN Rail 5V/5Amp power supply for Converters & Serial devicesThe Din Rail mounted power supply can be used to power a single or multiple Industrial Switches.
Because of it's Din Rail based mounting kit the power supply can be mounted along side your Industrial Ethernet Equipment.
| 
Click to Enlarge Image |
 Quick Download : Data Sheet
Product Features| | - Universal AC input/Full range
- Protections:Short circuit/Over load/Over voltage/Over temperature
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- LED indicator for power on
- 100% full load burn-in test
- Fix switching frequency at 100KHz
|
|
Product Specification| |
OUTPUT
~ DC VOLTAGE: 5V
~ RATED CURRENT: 5A
~ CURRENT RANGE: 0 ~ 5A
~ RATED POWER: 25W
~ RIPPLE & NOISE (max.): 100mVp-p
~ VOLTAGE ADJ. RANGE: 4.75 ~ 5.5V
~ VOLTAGE TOLERANCE: +/- 2.0%
~ LINE REGULATION: +/- 1.0%
~ LOAD REGULATION: +/- 1.0%
~ SETUP, RISE TIME: 800ms, 60ms/230VAC at full load
~ HOLD TIME (Typ.): 100ms/230VAC at full load
INPUT
~ VOLTAGE RANGE: 85 ~ 264VAC, 120 ~ 370VDC
~ FREQUENCY RANGE: 47 ~ 63Hz
~ EFFICIENCY (Typ.): 72%
~ AC CURRENT (Typ.): 1.5A/115VAC, 0.75A/230VAC
~ INRUSH CURRENT (Typ.): COLD START 28A/115VAC, 56A/230VAC
~ LEAKAGE CURRENT: <1mA / 240VAC
PROTECTION
~ OVER LOAD:
105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
~ OVER VOLTAGE:
5.75 ~ 6.75V
Shut down o/p voltage, re-power on to recover
~ OVER TEMPERATURE:
Tj 135 degrees C typically (U1) Detect on heat sink of power transistor
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT
~ WORKING TEMP.: -10 ~ +50 degrees C (Refer to output load derating curve)
~ WORKING HUMIDITY: 20 ~ 90% RH non-condensing
~ STORAGE TEMP., HUMIDITY: -20 ~ +85 degrees C, 10 ~ 95% RH
~ TEMP. COEFFICIENT: +/- 0.03%/ degrees C (0 ~ 50 degrees C)
~ VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
~ SAFETY STANDARDS: UL508, TUV EN60950-1 Approved
~ WITHSTAND VOLTAGE: I/P-O/P:3KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC
~ ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
~ EMI CONDUCTION & RADIATION: Compliance to EN55011,EN55022 (CISPR22) Class B
~ HARMONIC CURRENT: Compliance to EN61000-3-2,-3
~ EMS IMMUNITY: Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A
OTHERS
~ MTBF: 364.6K hrs min. MIL-HDBK-217F (25 )
~ DIMENSION: 93 x 78 x 67mm (L*W*H)
~ PACKING: 0.31Kg; 48pcs/16.1Kg/1.3CUFT
|
|
Ordering Information
|