|
DR12024 Din Rail Mounted Power SuppliesThe Din Rail mounted power supply can be used to power a single or multiple Industrial Switches.
Because of it's Din Rail based mounting kit the power supply can be mounted along side your Industrial Ethernet Equipment.
| 
Click to Enlarge Image
|
 Quick Download : Data Sheet
Product Features| | - AC input range selectable by switch
- Protections:Short circuit/Over load/Over voltage/Over temperature
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- LED indicator for power on
- 100% full load burn-in test
- Fixed switching frequency at 55KHz
|
|
Product Specification| |
OUTPUT
~ DC VOLTAGE: 24V
~ RATED CURRENT: 5A
~ CURRENT RANGE: 0 ~ 5A
~ RATED POWER: 120W
~ RIPPLE & NOISE (max.): 80mVp-p
~ VOLTAGE ADJ. RANGE: 24 ~ 28V
~ VOLTAGE TOLERANCE: +/- 1.0%
~ LINE REGULATION: +/- 0.5%
~ LOAD REGULATION: +/- 1.0%
~ SETUP, RISE TIME: 500ms, 70ms/230VAC 500ms, 70ms/115VAC at full load
~ HOLD TIME (Typ.): 36ms/230VAC, 32ms/115VAC at full load
INPUT
~ VOLTAGE RANGE: 88 ~ 132VAC/176 ~ 264VAC by switch, 248 ~ 370VDC
~ FREQUENCY RANGE: 47 ~ 63Hz
~ EFFICIENCY (Typ.): 84%
~ AC CURRENT (Typ.): 2.6A/115VAC, 1.6A/230VAC
~ INRUSH CURRENT (Typ.): COLD START 20A/115VAC, 40A/230VAC
~ LEAKAGE CURRENT: <3.5mA / 240VAC
PROTECTION
~ OVER LOAD:
105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
~ OVER VOLTAGE:
29 ~ 33V
Protection type : Shut down o/p voltage, re-power on to recover
~ OVER TEMPERATURE:
90 degrees C +/- 5 degrees C (TSW1)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT
~ WORKING TEMP.: -10 ~ +60 degrees C (Refer to output load derating curve)
~ WORKING HUMIDITY: 20 ~ 90% RH non-condensing
~ STORAGE TEMP., HUMIDITY: -20 ~ +85 degrees C, 10 ~ 95% RH
~ TEMP. COEFFICIENT: +/- 0.03%/degrees C (0 ~ 50 degrees C)
~ VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC
~ SAFETY STANDARDS: UL508, UL60950-1, TUV EN60950-1 Approved
~ WITHSTAND VOLTAGE: I/P-O/P:3KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC
~ ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
~ EMI CONDUCTION & RADIATION: Compliance to EN55011,EN55022 (CISPR22) Class B
~ HARMONIC CURRENT: Compliance to EN61000-3-2,-3
~ EMS IMMUNITY: Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A
OTHERS
~ MTBF: 136.8Khrs min. MIL-HDBK-217F (25 degrees C )
~ DIMENSION: 65.5 x 125.2 x 100mm (W*H*D)
~ PACKING: 0.79Kg; 20pcs/16.5Kg/1.1CUFT
|
|
Ordering Information
| | | DR12024 | DIN Rail 24V/5Amp power supply for Industrial switches | Where to Buy |
|
|