|
USB to CAN ConverterThe Canary CWC-565 is a CAN to USB conveter designed for coupling the CAN bus network to PC's via a USB interface.
The CWC-565 allows a connection to be established with a PC to automatically load relevant device drivers in a plug and play mode. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by using the CWC-565.
CAN bus is a serial communication technology which efficiently suppports distributed real-time control with a very high level of security. It also provides error process mechanisms and message priority concepts.
| 
Click to Enlarge Image
|
 Quick Download : Data Sheet
Product Features| | - Supports CAN 2.0A and 2.0B
- Compliant with USB 1.1 & 2.0
- Supports Windows 98/ME/2000/XP/Vista/Linux Drivers
- Equipped with jumper for 120ohm terminator resistor
- Equipped with power, data flow, and error indicator for CAN and USB
- Maximum transmission speed up to 1Mbps for CAN and 921.6Kbps for USB
- Built in Watchdog feature
- DIN Rail mountable
|
|
Product Specification| |
USB Connector
~ USB Type B
Baud Rate
~ 921.6Kbps
Compatibility
~ USB 1.1 & 2.0
Receive Buffer
~ 900 Data Frames
CAN Bus Protocol
~ 2.0A and 2.0B
CAN Port Channels
~ 1
CAN Controller
~ Phillips SJA1000T
CAN Transceiver
~ Phillips 82C250
Baud Rate
~ 10K to 1Mbps
Protection
~ 3000Vrms on CAN side
Pin Out
~ C.I.A. DS-102 (CAN_H=7, CAN_L=2, GND=3)
Receive Buffer
~ 1000 Data Frames
Power Consumption
~ 1.5 watts
Dimensions
~ IP-20, 72mm (W) x 108mm (H) x 35mm (D)
Installation
~ DIN Rail, Panel Mount
Temperature
~ Operating: -25 to 75 Degrees C
~ Storage: -40 to 80 Degrees C
Humidity
~ 5 to 90% RH, non-condensing
|
|
Ordering Information
|