|
Discontinued Product.Ethernet to CAN/RS-232/RS-485 ConverterThe Canary CWC-540 is a CAN to Ethernet gateway designed to enable CAN networks to be coupled together over Internet/Ethernet to make remote monitoring and control possible.
The CWC-540 controls network communication and makes a transparent CAN-based application interface available to the user allowing connection from Ethernet devices via virtual COM technology.
CAN bus is a serial communication technology which efficiently suppports distributed real-time control with a very high level of security. It also provides error process mechanisms and message priority concepts.
| 
Click to Enlarge Image
|
 Quick Download : Data Sheet
Product Features| | - Supports CAN 2.0A and 2.0B
- Supports 10/100Base-TX Ethernet Controller
- Supports CAN - Ethernet Gateway
- Supports WEB Configuration
- Equipped with jumper for 120ohm terminator resistor
- Supports 2500Vrms photo isolation protection on CAN side
- Supports maximum of 25 Ethernet client connections
- DIN Rail mountable
|
|
Product Specification| |
CPU
~ 80186, 80 MHz
Flash
~ 512K bytes
SRAM
~ 512K bytes
NVRAM
~ 31 bytes
EEPROM
~ 16K bytes
Real time Clock
~ Supported
Watchdog Timer
~ Supported
COM 1
~ RS-232 (TXD, RXD, RTS, CTS, GND)
COM 2
~ RS-485 (D2+, D2-)
CAN
~ 1 CAN port with 2 CAN bus connector (CAN_H, CAN_L)
Ethernet Port
~ 10/100Base-TX auto-negotiation, auto MDI/X, LED indicator
CAN Bus Protocol
~ 2.0A and 2.0B
CAN Controller
~ Phillips SJA1000T
CAN Transceiver
~ Phillips 82C250
Baud Rate
~ 1Mbps
Protection
~ 2500Vrms on CAN side
Baud Rate
~ 115.2Kbps
Data Bits
~ 7, 8
Parity Bits
~ Even, Odd, none
Stop Bit
~ 1
Power Input
~ 10 ~ 30VDC
Power Protection
~ Reverse protection and frame ground for ESD
Power Cosumption
~ 2 watts
Dimensions
~ IP-20, 72mm (W) x 122mm (H) x 33mm (D)
Installation
~ DIN Rail, Panel Mount
Temperature
~ Operating: -25 to 75 degrees C
~ Storage: -40 to 80 degrees C
Humidity
~ 5 to 90% RH, non-condensing
|
|
Ordering Information
|