|
Intelligent RS-232/422/485 to CAN ConverterThe Canary CWC-530A is a CAN to RS-232/422/485 converter designed to convert messages in CAN applications.
The CWC-530A allows CAN devices to communicate with programmable RS-232/422/485 devices (PC, PLC or PAC) PC or serial devices.
CAN bus is a serial communication technology which efficiently suppports distributed real-time control with a very high level of security. It also provides error process mechanisms and message priority concepts.
| 
Click to Enlarge Image
|
 Quick Download : Data Sheet
Product Features| | - Supports CAN 2.0A and 2.0B
- Supports multiple baud rates from 10K to 1Mbps
- Equipped with jumper for 120ohm terminator resistor
- Software configurable CAN and RS-232/422/485 communication parameters
- Provides transparent communication between RS-232/422/485 and CAN bus network
- Power, data flow and error indication for CAN and RS-232/422/485
- Watchdog feature
- DIN Rail mountable
|
|
Product Specification| |
CAN Bus Protocol
~ 2.0A and 2.0B
CAN Controller
~ Microprocessor with 20MHz
CAN Transceiver
~ Phillips 82C250
CAN Port Channels
~ 1
CAN Port Connector
~ ISO/IS 11808-2, 9-pin D-sub connector
Baud Rate
~ 10K to 1Mbps
Protection
~ 3000VDC power protection on CAN side
~ 2500Vrms photo-couple isolation on CAN bus
Terminator Resistor
~ Selectable 120ohm terminator resistor by jumper
Pin Out
~ C.I.A. DS-102 (CAN_H=7, CAN_L=2, GND=3)
Receive Buffer
~ 900 data frames
RS-232/422/485 Connector
~ 14-pin terminal connector
Baud Rate
~ 110 - 115.2bps
Data Bits
~ 5, 6, 7, 8
Receive Buffer
~ 900 Data Frames
Power Input
~ 10 ~ 30VDC
Power Protection
~ Power reverse and over voltage protection
Power Consumption
~ 1 watt
Dimensions
~ IP-20, 72mm (W) x 118mm (H) x 33mm (D)
Installation
~ DIN-Rail, Panel Mount
Temperature
~ Operating: -25 to 75 degrees C
~ Storage: -40 to 80 degrees C
Humidity
~ 5 to 90% RH, non condensing
|
|
Ordering Information
| | | CWC-530A | Intelligent RS-232/422/485 to CAN Converter | Where to Buy |
|
|