|
Discontinued Product.CAN to Fibre Converter with ST Fibre ConnectionThe Canary CUC-532 is a CAN to Fibre Optic converter designed to extend CAN Bus signals over fibre cable. It secures data transmission and provides immunity from EMI/RFI interferences.
The CUC-532 is used for CAN applications and allows trasmission up to 1.4km. It is an ideal device for applications where the transmission must be protected from surges, lightning, electrical contact or chemical corrosion.
CAN bus is a serial communication technology which efficiently suppports distributed real-time control with a very high level of security. It also provides error process mechanisms and message priority concepts.
| 
Click to Enlarge Image
|
 Quick Download : Data Sheet
Product Features| | - Supports CAN 2.0A and 2.0B specifications
- Supports Multimode fibre optic port with ST connection
- Automatic baud rate detection and supports baud rate up to 500Kbps
- Equipped with jumper for 120ohm terminator resistor
- Transmission up to 100 nodes on CAN port
- Provides power reverse protectionand over voltage protection
- DIN Rail mountable
|
|
Product Specification| |
Fibre Port
~ Multimode ST Connector
LED
~ Power LED x1, Transmit LED x1, Receive LED x1
Fibre Cable
~ 62.5/124 micron
Wavelength
~ 850nm
Baud Rate
~ 10K to 500Kbps
Terminal Resistor
~ Selectable 120ohm terminator resistor by jumper
CAN Connector
~ 8-pin Terminal Block
CAN Bus Protocol
~ 2.0A and 2.0B
CAN Port Channels
~ 2
Propagation Delay
~ 125ns
Power Input
~ 10 ~ 30VDC
Power Protection
~ Power reverse and over voltage protection
Power Consumption
~ 0.5 watts
Dimensions
~ IP-20, 99mm (W) x 32.30mm (H) x 77.50mm (D)
Installation
~ DIN-Rail, Panel Mount
Temperature
~ Operating: -25 to 70 degrees C
~ Storage: -40 to 80 degrees C
Humidity
~ 5 to 90% RH, Non-condensing
|
|
Ordering Information
| | | CUC-532 | CAN to Fibre Converter with ST Fibre Connection | Where to Buy |
|
|