|
Discontinued Product.CAN Bus Isolated RepeaterThe Canary CUC-531 is a CAN isolated repeater designed to establish a physical coupling of two or segments in a CAN bus system.
With the CUC-531, users can implement tree or star topologies as well as long drop lines and increase the maximum number of bus nodes. For added protection, the CUC-531 comes with 2500Vrms optical isolation to seperate and protect critical segments of a system from the CAN network. CAN bus is a serial communication technology which efficiently suppports distributed real-time control with a very high level of security. It also provides error process mechanisms and message priority concepts.
| 
Click to Enlarge Image
|
 Quick Download : Data Sheet
Product Features| | - Supports CAN 2.0A and 2.0B specifications
- Automatic baud detection and supports a maximum baud rate of 800Kbps
- Equipped with 2500Vrms photo coupler isolation on the CAN side
- Equipped with 3KV galvanic isolation among power supply and CAN ports
- Equipped with jumper for 120ohm terminator resistor for CAN bus
- Transmission of up to 100 nodes on each CAN port
- DIN Rail mountable
|
|
Product Specification| |
CAN Connector
~ 8-pin Terminal Block
CAN Bus Protocol
~ 2.0A and 2.0B
CAN Port Channels
~ 2
Baud Rate
~ 5K ~ 800Kbps
Protection
~ 3000VDC galvanic isolation on power supply and CAN ports
~ 2500Vrms photo-couple isolation between 2 CAN ports
Terminator Resistor
~ Selectable 120ohm resistor by jumper
Propogation Delay
~ 200ns
Power Input
~ 10 ~ 30VDC
Power Protection
~ Power reverse protection and over voltage protection
Power Consumption
~ 2 watts
Dimensions
~ IP 20, 72mm (W) x 122mm (H) x 33mm (D)
Installation
~ DIN Rail and Panel Mount
Temperature
~ Operating: -25 to 75 degrees C
~ Storage: -40 to 80 degrees C
Humidity
~ 5 ~ 90% RH, Non Condensing
|
|
Ordering Information
|