###################--> START LEFT --> ###################-->
|
###################--> -- CENTER> ###################-->
15G120150P Wall Mount Plug PackThe 15G120150P Wall mount power supply can be used to power any of the Ethernet Direct Industrial products.
| 
Click to Enlarge Image |
Quick Download : Data Sheet
Product Specification| |
 INPUT ~ AC Input Voltage: 100 - 240V AC
~ AC Input Frequency: 50 / 60 Hz
~ AC Input Current - 230V AC (max): 0.4A
~ Input Power (max): 21.43W
~ AC Inrush Current* - 230V AC, 50Hz: No damage shall be incurred and the input fuse shall not blow.
~ Primary current protection: An internal fuse on the AC input line is provided.
~ Configuration: Wall mount, AU-pin, 2-conductors,
 OUTPUT ~ Normal DC Output Voltage: +12V
~ Maximum Load Current: 1.5A
~ Minimum Load Current: 0.05A
~ Rated Output Power: 18.0W
~ Load Regulation: ±5% from 10% to 100% of rated load
~ Ripple and Noise: 100mV
~ Over-current Protection: Adaptor protected with 200% of rated output.
~ Over-voltage Protection: Zener clamp.
~ Short-circuit Protection: The adaptor shall not be damaged by shorting the DC output to Ground with auto recovery functioning correctly.
~ Hold-up Time (min): 10mS
~ Output over-shoot: <7% of nominal voltage value
~ Temperature coefficient: Output voltage temperature coefficient ±0.05%/C
~ Turn-on Delay (max): 2 Seconds
~ Rise Time: Start-up rise time of <20mS to rise to within regulation limits
~ Efficiency: 70% minimum at normal input voltage and full load.
 MECHANICAL ~ Dimensions: 82.0(L) x 43.5(W) x 30.0(D)mm.
~ Weight: 149g
~ Input Plug Type: Wall type, SAA 2-pin AS/NZS3112:2000
~ Output Cord: Wire: 18AWG/2C, 2000mm.
~ Output Plug: DC Barrel Plug (with fork & groove)
 ENVIRONMENTAL ~ Operating Temperature: 0ºC to +35ºC
~ Storage Temperature: -20ºC to +80ºC
~ Operating Humidity: 10 ~ 90 % Non-condensing
~ Storage Humidity: 10 ~ 90 % Non-condensing
 SAFETY ~ Dielectric withstanding voltage test (Hi-pot test)input to output: 3000V AC 10mA for 1 minute..
~ Insulation Resistance: 10MΩ at 500V DC between Primary Active, Neutral line and secondary.
~ Leakage Current: 0.25mA maximum at normal AC input voltage and frequency
 RELIABILITY ~ MTBF: 50,000 hours.
|
|
Ordering Information
|
###################--> END -- CENTER> ###################-->
###################--> END Content--> ###################-->